已有 52 条评论
  1. Sonic853

    折腾半天才发现可以用Python3.7.0运行“模型数据下载脚本”🌚

    Sonic853 November 24th, 2018 at 05:53 pm回复
    1. Sonic853

      试着弄了一下,成功导出了一个模型,万分感谢

      Sonic853 November 24th, 2018 at 06:29 pm回复
      1. 付生

        能帮忙回答一下我那几个错误点么?

        付生 November 24th, 2018 at 09:13 pm回复
        1. Sonic853

          我做了一个集成好的Blender v2.49,理论免装Python2.6.6,可以直接运行Blender打开“Blender249[osgjs]”文件夹下的“Blender249.blend”文件
          https://pan.baidu.com/s/1EI1y8cYK3IhAoZWVacHPrw

          Sonic853 November 25th, 2018 at 07:01 pm回复
          1. RGL

            文件取消了,请问可以重新发一下吗

            RGL December 12th, 2018 at 06:38 pm回复
        2. journey.ad

          确认Python、Blender版本是否和文中一致,二者都可直接在官网下载到,Blender 2.49b也是可以的
          检查环境变量是否已正确配置,正常的话Blender启动后会在控制台打印出Checking for installed Python... got it!
          确认所有操作是否都已完成,看你的描述,很可能是工具准备的第3步操作有误

          仍有问题的话,把报错贴上来看看

          journey.ad November 25th, 2018 at 12:55 am回复
          1. 付生

            谢谢

            付生 November 25th, 2018 at 09:53 pm回复
  2. FlameHaze

    执行python报错鸭

    100.0 procent
    ################################################## Geometry
    Traceback (most recent call last):
      File "starter.py", line 1767, in openFile
      File "starter.py", line 1760, in Parser
      File "starter.py", line 1704, in osgParser
      File "starter.py", line 1647, in getNode
      File "starter.py", line 1611, in getChildren
      File "starter.py", line 1502, in getMatrixTransform
      File "starter.py", line 1611, in getChildren
      File "starter.py", line 1502, in getMatrixTransform
      File "starter.py", line 1615, in getChildren
      File "starter.py", line 1536, in getSkeletonNode
      File "starter.py", line 1611, in getChildren
      File "starter.py", line 1502, in getMatrixTransform
      File "starter.py", line 1613, in getChildren
      File "starter.py", line 1647, in getNode
      File "starter.py", line 1619, in getChildren
      File "starter.py", line 1552, in getGeometryNode
      File "starter.py", line 1393, in getGeometry
      File "starter.py", line 936, in getPrimitiveSetList
    KeyError: '"Mode"'
    
    FlameHaze November 24th, 2018 at 05:48 pm回复
    1. journey.ad

      可能是模型的问题?
      贴一下地址我确认看看

      journey.ad November 25th, 2018 at 01:00 am回复
  3. 付生

    Blender v2.49b 找了一晚上没找到Blender v2.49

    付生 November 24th, 2018 at 12:22 am回复
  4. 付生

    软件我用的是Blender v2.49

    付生 November 24th, 2018 at 12:21 am回复
  5. 付生

    按照你的步骤来 - -结果发现添加环境变量PythonPath 是不是在我的电脑-属性里添加,然后file.osgjs.gz 该怎么下载?还有Python代码区域,然后按Alt + P后 我这提示错误。check console

    付生 November 24th, 2018 at 12:05 am回复

说点什么?

返回顶部